Can anyone comment on the photo of the attached switchboard panel with respect to electrode configuration.
| Attachments: |
|
IMG_0345.JPG [ 560.29 KiB | Viewed 60174 times ] |
|
IMG_0344.JPG [ 573.14 KiB | Viewed 60174 times ] |
| Arc Flash Forum https://brainfiller.com/arcflashforum/ |
|
| Electrode Configuration https://brainfiller.com/arcflashforum/viewtopic.php?f=8&t=5117 |
Page 1 of 1 |
| Author: | EPB [ Tue Jun 11, 2019 12:31 pm ] | |||
| Post subject: | Electrode Configuration | |||
Can anyone comment on the photo of the attached switchboard panel with respect to electrode configuration.
|
||||
| Author: | JJH [ Fri Jun 14, 2019 12:23 pm ] |
| Post subject: | Re: Electrode COnfiguration |
I'm guessing that this is an MLO switchboard with (2) feeder breakers? My thoughts would be VCB since there is no main breaker to act as a barrier. If there was a main breaker, then I would think VCBB. |
|
| Page 1 of 1 | All times are UTC - 7 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|