| Arc Flash Forum https://brainfiller.com/arcflashforum/ |
|
| Table 2 and Table 4 for gap and conductor distances https://brainfiller.com/arcflashforum/viewtopic.php?f=8&t=3464 |
Page 1 of 1 |
| Author: | RECS [ Fri Oct 03, 2014 11:07 am ] |
| Post subject: | Table 2 and Table 4 for gap and conductor distances |
When calculating the IE at an equipment, which of the two gap distances should I use? The one given by Table 2 or the one shown in Table 4? Table 2 is for bus and Table 4 is for conductors, but buses are also conductors. Please explain. Thanks so much. RECS |
|
| Page 1 of 1 | All times are UTC - 7 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|