| Arc Flash Forum https://brainfiller.com/arcflashforum/ |
|
| Recommended Arc Flash Suit https://brainfiller.com/arcflashforum/viewtopic.php?f=33&t=5982 |
Page 1 of 1 |
| Author: | Jolabebe67 [ Fri Feb 28, 2025 6:41 pm ] |
| Post subject: | Recommended Arc Flash Suit |
I need a 40 cal/cm² arc flash suit for live work on 13.8 kV switchgear in an indoor substation. Focus on comfort and full-body protection is a plus. What brand or specific suits do you recommmend for this level of protection? |
|
| Author: | Jim Phillips (brainfiller) [ Mon Mar 03, 2025 3:47 pm ] |
| Post subject: | Re: Recommended Arc Flash Suit |
I can't recommend but do a web search, due diligence etc. Be sure it complies with either ASTM or IEC standards. See where it is made, some counterfeit PPE is out there. |
|
| Author: | AustinPena [ Tue Oct 14, 2025 8:52 pm ] |
| Post subject: | Re: Recommended Arc Flash Suit |
Go with a well-known NFPA-70E / CAT-4 (≥40 cal/cm²) kit from a major vendor that advertises lightweight / breathable fabrics and a good hood option (lift-front or PrismShield) for comfort and full-body protection. Strong candidates are below with why I’d pick them. Try before you buy if possible — fit/mobility matters a lot for live switchgear work; many vendors/distributors will demo or exchange. |
|
| Author: | jill3s [ Thu Dec 04, 2025 12:48 am ] |
| Post subject: | Re: Recommended Arc Flash Suit |
That's a serious protection level! For 40 cal suits, consider brands like Salisbury or Oberon. Look for multi-layer systems with breathable fabrics for comfort in the substation. Ensure full head-to-toe coverage, including gloves and hood. I'd also suggest playing Block Blast during breaks to de-stress. Great post! |
|
| Page 1 of 1 | All times are UTC - 7 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|