| Arc Flash Forum https://brainfiller.com/arcflashforum/ |
|
| Arc Flash Label Sizes https://brainfiller.com/arcflashforum/viewtopic.php?f=33&t=3129 |
Page 1 of 1 |
| Author: | Jim Phillips (brainfiller) [ Sun Jan 05, 2014 3:18 pm ] |
| Post subject: | Arc Flash Label Sizes |
Arc flash label size may vary depending on the user’s preference and also the available space on equipment. This week’s question is about the “typical” sizes of arc flash labels. A few of the more common sizes are listed. Which selection best represents your typical arc flash label size?
|
|
| Author: | JBD [ Mon Jan 06, 2014 7:05 am ] |
| Post subject: | |
4 x 4 inches |
|
| Author: | BISAM [ Mon Jan 06, 2014 9:07 am ] |
| Post subject: | |
4 X 3 inches. Fits on wireway between MCC sections |
|
| Author: | Voltrael [ Tue Jan 07, 2014 6:52 am ] |
| Post subject: | |
Our standard size is 4x6. We also have some smaller 2.25x3 labels for places where the big labels are too big to fit properly (such as some local disconnects.) |
|
| Author: | Ryan McKee [ Thu Jan 09, 2014 3:40 pm ] |
| Post subject: | |
3x3 |
|
| Author: | McQ [ Fri Jan 31, 2014 8:59 am ] |
| Post subject: | |
4X6 Standard label 90% of equipment locations and 2X4 on smaller disconnects (100A-60A). |
|
| Author: | Larry Stutts [ Fri Jan 31, 2014 10:51 am ] |
| Post subject: | |
3.5 x 5 - (OL5100LP) They fit 4 to a sheet, they are very reasonably priced, they are weatherproof Polyester, and they can be printed on a Laser Printer |
|
| Page 1 of 1 | All times are UTC - 7 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|