1. Create Your User Profile and Status Updates

    Arc Flash Forum members are invited to create a user profile. Let others know who you are, what you do and even add a picture or avatar of yourself. What are you up to? Let people in the arc flash and electrical safety community know with "status updates"!
  2. Welcome to the All New Arc Flash Forum

    Arc Flash Forum is a community where we help each other learn about arc flash and electrical safety. There is still much to be learned about arc flash, standards, PPE, studies and more and We need your HELP!

    If you have good information about Arc Flash - Post It! If you have a question about Arc Flash - Post It! If you can provide answers to Arc Flash questions - Post it!

    Sign up as a today member! Feel free to link to this site www.arcflashforum.com. Tell your friends. We want to help everyone be safe in the workplace!
  3. Bigger and Better!

    As you have no doubt noticed, the forum has been through quite an upgraded and looks and feels very nice! There are loads of new features and ways in which this site can now be even more useful to the community in learning about Arc Flash and Electrical Safety.

    Create your detailed user profile
    Add a profile photo of yourself
    Like the forum on Facebook
    "Like" users' posts
    Publish your articles in the library
    ...and much, much more!

    Learn More About the New Features Here
Create Your User Profile and Status Updates Welcome Message Arc Flash Forum has been Upgraded!

Substation Transformers - AF Boundary

Discussion in 'System Modeling and Calculations' started by Don't_wanna_burn, May 17, 2010.

  1. Don't_wanna_burn New Member

    This may be a dumb question, but I'll ask anyway.

    Shouldn't the AF boundary be calculated and applied to substation type transformers (tranformers with exposed bushings)?

    A example would be a utility substation feeding an industrial plant. Very large transformers installed in a small fenced area, with a parking lot and/or sidewalk next to the fence.
    Don't_wanna_burn, May 17, 2010
    #1

  2. JBD Well-Known Member

    Yes it should when interaction is taking place.
    If the substation is under the control of the facility, then NFPA70E applies.
    If the substation is under the control of the utility, then the NESC applies.

    Unless some one or something is interacting with the exposed conductors, arc flash boundaries are not applicable to someone 'passing by on the side walk', just like they are not for people passing an indoor metal enclosed substation.
    JBD, May 17, 2010
    #2

  3. Gary B Well-Known Member

    This could be rationalized to include all utility transformers however; there probably has not been a problem with these.

    That is somewhat like requiring seat belts on school buses: it seems like sound reasoning yet there hasn't been a problem without.
    Gary B, Oct 12, 2010
    #3

Share This Page