Arc Flash Forum was created to help everyone help each other learn about arc flash and electrical safety. There is still much confusion about arc flash, standards, PPE, studies and more. We need your HELP! If you have good information about Arc Flash - Post It! If you have a question about Arc Flash - Post It! If you can provide answers to Arc Flash questions - Post it! PLEASE do not post advertisments - they may be deleted. Sign up as a member! Feel free to link to this site www.arcflashforum.com Tell your friends. We want to help everyone be safe in the workplace! All information provided by contributors on this site is for use at your own risk. Thanks for stopping by! - Jim Phillips - www.brainfiller.com

Post your questions and comments here that do not fit into one of the other categories below .

Discuss your electrical safety practices, policy, proceedures and other related topics here!

Discussions of arc resistant switchgear, remote racking of breakers, and other devices used to reduce the hazards associated with arc flash.

What level of PPE is required? What does category 2 mean? Standards, testing, garment information, selection and application questions - It's all here!

Questions about how to perform an arc flash study.

What gets labeled? What should the label look like? Where do the labels go?

Where you can share experiences about various Arc Flash Programs

What should be modeled? What data should be used? How do I .....?

Discussion area for Canada's CSA Z462 which is Canada's version of NFPA 70E. How is it being used? What are the requirements?

Discuss Arc flash and electrical safety practices used in European countries here. Electricity at Work Regulations - EAWR, UK Health and Safety Work Act and More!

1910 Subpart S, 1926 Subpart K, 1910.269,General Duty Clause and more.

Post questions and comments about this standard for calculating arc flash. Topics such as X distance factor, 2 second rule, incident energy, arcing current are all here!

NEC Article 110.16 defines requirements for equipment labeling. This one article regarding arc flash continues to evolve with each code cycle. Discuss your opinions about 110.16 here.

This forum is to discuss the 2007 National Electrical Saftey Code's (NESC) new rule 410A3, which states, "Effective January 1, 2009, the employer shall ensure that an assessment is performed to determine potential exposure to an electric arc for employees who work on or near energized parts or equipment."

Discuss NFPA 70E here. Questions, opinions, interpretations and debate about this important (and somtimes confusing) standard. Also includes suggestions, opinions and debate about future revisions to this standard.

Post your photos here about arc flash and electrical safety. Maximum jpg file size is 500kb, 800 x 800 pixels.

Tell us your stories about the good, the bad and the ugly from your arc flash experiences or the experience of others. Successful PPE practices, terrible accidents, near misses - this is where people can read just how serious an arc flash can be and/or how proper practices saved someone's life.